Preparing Your Boat for Painting
Exposure to the sun and extreme temperatures may make the painting on your boat crack or fade. When this happens, it means the boat requires a fresh coat of paint. Also, it is critical to buy a quality boat that can last before its paint fades or cracks. At The Sports Center, we have a diverse boat inventory that you might like. For more information, visit our location in Perry, Georgia, serving Macon and Columbus.
You can always repaint your boat so long as you get it ready. You will need the following to get started: Paintbrush, Paint roller, Finishing sander, Topside boat paint, Bottom boat paint, Putty knife, Primer, Epoxy filler, Dewaxing solvent, Mask, Protective glasses, Tape, Rag, and Sandpaper.
Choose the Correct Environment to Prepare and Paint
Painting your boat should not take much time. You will need to pick a place that will save you time and money. Focus on the following when selecting the place:
The Area Should Be Sheltered
Working under a sheltered area will be good for you and the boat. You will get to avoid working under the sun and remain hydrated. Also, a shed will protect the boat from debris or the heat from the sun.
If you can’t find a shade, you can make it using plastic sheeting or tarps.
The Place Should Have Good Ventilation
Good ventilation will allow the paint coat to dry under the best temperatures. If a shelter is excessively hot, there is a chance the coat may take time to dry and will not be perfect.
Do the Painting on a Day That Is Less Likely to Rain
We know that rain can distract you from completing a task. Also, it could wash away the paint before it gets the chance to dry. In this case, a warm sunny day or a sunless day could be the best time for you to get started.
Paint Mid-morning or Late Afternoon
At any of these periods, the paint will get a chance to dry properly. When you do it too early in the morning or late evenings, you may encounter dew. Also, mid-afternoons are not great because of the high temperatures from the sun.
Preparing for Painting
Here are the steps you should follow.
- Clean Your Boat: Thoroughly clean the boat using a scraper, rags, and use a high-pressure hose. Keep the surface clean for smooth painting.
- Remove the Hardware: Remove all the hardware from your boat to avoid distractions. Also, you will get to reach every section.
- Strip the Wax Coating: Make sure you remove the wax from your boat to allow the paint to reach the surface.
- Sand and Feather: After scrapping and peeling the boat, you need to sand and feather it along the edges. The surface needs to be smooth enough for easy and better painting.
At this point, your boat is ready for painting. If you want to buy a quality boat, stop by The Sports Center in Perry, Georgia, serving Macon and Columbus.